FrSky S.Port  FSD. Panel OLED de datos telemetria. Para módulos de telemetría de la Serie X

Especificaciones:

- Modelo: FSD (FrSky S.Port Dashboard)

- Compatibilidad: FRSKY módulos de telemetría de la Serie X

- Rango de voltaje: 4.8 ~ 6V

- Dimensiones: 75 * 50 * 13.8mm

- Pixel: 128 * 64

Características:

- Muestra en tiempo real todos los datos de los sensores conectados;

- Programación de alarmas en diferentes rangos.

- Programador para establecer Identidad en modulos S.Port

- Posibilidad de actualizar a través del FSD el firmware  de los sensores  S.Port.

The FrSky Ampere Sensor is used to measure Current (A), Power Consumption (mAH), Power (W) and Voltage (V) when it is connected between a Battery and ESC. This is the new Smartport version that works with the new X series of receivers.  Smartport sensors connect in a daisy chain without the need for the analog Sensor Hub.  It is not backward compatible with the older series receivers. The sensor come standard with XT60 connectors.

Please note that this sensor also meaures overall pack voltage whereas the FLVSS meaures pack voltage and individual LIPO cell voltage. 

Each type of FrSky Smart Port enabled sensor has its unique physical ID. The default physical ID for this sensor is 03. The ID number can be changed with the FrSky Servo Channel Changer. 

Specifications
Dimension: 61.2×16.7×13.2mm
Weight: 17g
Measurement range: 0~40A
Current consumption: 25mA@5V
Maximum safe current: 40A
Maximum battery voltage: 6S

Additional Resources

The FrSky GPS Sensor feeds variable directional information such as altitude, position, speed, and UTC time, which is displayed in real time on FrSky's Taranis transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)  This sensor will only work with the FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.  This is a great addition to your Taranis setup.

Specs:
Mode: GPS sensor (V2)
Interface: S.PORT
Operational Voltage: DC 4 -10 V
Weight: 11.3g
Current Draw: 80mA @5V
Sensitivity: -160dBm
Operating Temperature Range: -40 to 85C
Date Rate: 1Hz
Antenna: Built-in patch
Time to fix: 30s cold
Speed Accuracy: Approx 0.1m/s
Position Accuracy: Approx 2.5m CEP
Dimensions: 40 x 20 x 9mm (L x W x H)
Operation Limits: Dynamics 4g /Altitude 50,000m /Velocity 500m/s
Compatibility: FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

FrSKY SBUS to CPPM Decoder 

Converts the SBUS signal into CPPM without the need for any soldering. Simply plug into your SBUS receiver port and your control servo and it will decode the SBUS signal to CPPM. A full instruction manual is included with the decoder for easy use.

Specs:
Weight: 4.1g
Dimensions: 250 x 13 x 5mm
Operating Voltage: 4-10V DC
Max Current: 700mA
Operating Temp Range: -10 ~ 80 (Degrees C)

FRSKY PCB ANTENNA FOR X6R, X8R

Frsky IPEX RF Coax Connector 250mm

Frsky RX antena 400mm

Frsky RX antena 600mm

Frsky 2.4Ghz 7dBi Patch Antena

Long RF Coax Connector 200MM