How to change modes (Mode 2 to Mode 1)
How to Setup ExpressLRS on Radiomaster TX16S MKII
Renting Drones
Visita nuestras redes sociales
Categoría de Productos Radiomaster Radiomaster AG01 CNC Hall Gimbal Set TX16s
Categoría de Productos Radiomaster 2.4G ELRS EP1 Nano Receiver
Categoría de Productos Radiomaster 2.4G ELRS EP2 Nano Receiver
Categoría de Productos Radiomaster AG01 MINI CNC HALL GIMBAL FOR ZORRO & TX12 - SET VERSION (2PCS) BY RADIOMASTER
Categoría de Productos Radiomaster RADIOMASTER - ZORRO CARRY CASE
Categoría de Productos Radiomaster R88 Receiver
Categoría de Productos Radiomaster RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter ELRS
Categoría de Productos Radiomaster 12pcs Labeled Silicon Switch Cover Set (Short
Categoría de Productos Radiomaster 12pcs Labeled Silicon Switch Cover Set Long
Categoría de Productos Radiomaster RadioMaster Deluxe Neck Strap Adjustable for Transmitter
Nuevo
Radiomaster AG01 CNC Hall Gimbal Set TX16s
N.º de producto: HP157-AG01-SET TX16SNo disponible en estos momentos
Notificar sobre disponibilidad
159,00 €
Los clientes que han comprado este producto también han comprado
 |
*
Examine esta categoría: Radiomaster
2.4G ELRS EP1 Nano Receiver
N.º de producto: HP157-EX-EP1No disponible en estos momentos
Notificar sobre disponibilidad
16,99 €
The 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
We have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications
- Item Name: EP1 Nano Receiver
- Type: ISM
- ESP8285 MCU
- SX1280IMLTRT RF Module
- Omnidirectional antenna
- Frequency Range: 2400 MHz to 2500 MHz
- Maximum receive refresh rate: 500Hz
- Minimum receiver refresh rate: 25Hz
- Working voltage: 5v
- Weight: 0.42g(without antenna)
- Dimension: 10mm*10mm*3mm
- Peak gain: 2.23dB
- Manual: EP1 Manual
Notes
Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available.
More details
https://github.com/ExpressLRS/ExpressLRS
Bind procedure:
- Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
- Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
- Receiver LED status meanings:
PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module
EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1 from the web browser(password: expresslrs)
Zorro Radio Series
- Zorro Radio Controller
- 18350 900mah Battery
- EP1 Nano Receiver
- EP2 Nano Receiver
- Carry Case for Zorro Radio
- XT30 to JST 3 Pin connector for Zorro Radio
Package Included
- 1 * EP1 Nano Receiver
- 1 * 40mm Omnidirectional Antenna
- 1 * 90mm Omnidirectional Antenna
Los clientes que han comprado este producto también han comprado
 |
 |
 |
*
Examine esta categoría: Radiomaster
Nuevo
2.4G ELRS EP2 Nano Receiver
N.º de producto: HP157-RX-EP2No disponible en estos momentos
Notificar sobre disponibilidad
16,99 €
2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
We have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications
- Item Name: EP2 Nano Receiver
- Type: ISM
- ESP8285 MCU
- SX1280IMLTRT RF Module
- SMD Ceramic antenna
- Frequency Range: 2400 MHz to 2500 MHz
- Maximum receive refresh rate: 500Hz
- Minimum receiver refresh rate: 25Hz
- Working voltage: 5v
- Weight: 0.44g
- Dimension: 10mm*10mm*6mm
- Peak gain: 3.7dB
- Manual: EP2 Manual
Notes
Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available.
More details
https://github.com/ExpressLRS/ExpressLRS
Bind procedure:
- Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
- Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully.
- Receiver LED status meanings:
PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module
EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1 from the web browser(password: expresslrs)
Zorro Radio Series
- Zorro Radio Controller
- 18350 900mah Battery
- EP1 Nano Receiver
- EP2 Nano Receiver
- Carry Case for Zorro Radio
- XT30 to JST 3 Pin connector for Zorro Radio
Package Included
- 1 * EP2 Nano Receiver
Nuevo
AG01 MINI CNC HALL GIMBAL FOR ZORRO & TX12 - SET VERSION (2PCS) BY RADIOMASTER
N.º de producto: AG01MINI-SET
En existencias
se puede enviar en 1 días
119,00 €
Custom designed for RadioMaster's Zorro and TX12 radios, the AG01 Mini gimbals allow for unparalleled precision and stick feel.
BULLET POINTS
- Made with CNC processed aviation grade aluminum.
- Sticky360 Mini Gimbal Sticks as standard.
- Non contact hall sensors for accurate control inputs and precise centering.
- Quad precision bearings for unparalleled stick feel.
- Adjustable vertical travel angle (Min. 38°, Max. 54°).
- Custom designed for RadioMaster Zorro & TX12.
SPECIFICATIONS
- Sensor type: Hall Sensor
- Working voltage: DC 3.3V
- Linearity: Real-time (No delay)
- Adjustable vertical travel range: 38°—54°
- Self-centering adjustment : Yes
- Easy mode adjustment
- Adjustable tension : Yes
- Quad bearing: Yes
- Temperature range: -20°C-85°C
- Size: 49*42*48mm
- Weight: 42g(±0.3g)
INCLUDED
- 2x AG01 Mini Hall CNC Gimbal
- 2x Hex tool
- 8x Installation screw
- 2x Spare normal tension spring
- 2x Throttle tension screw
RADIOMASTER - ZORRO CARRY CASE
N.º de producto: ZOR-CASE
En existencias
se puede enviar en 1 días
23,90 €
R88 Receiver
N.º de producto: R88
En existencias
se puede enviar en 1 días
25,00 €
By popular demand, we now have a range of RadioMaster receivers available. The R series receivers are Frsky D8 and D16 Compatible and offer a range suitable to drones and RC modelers. Order now while stocks last!
Specification
- Type: R88 - D8 8ch PWM Receiver
- Channels: 8
- Frequency range: 2400-2483.5Mhz
- Power input range: 4.5-8.4V
- Signal format: Frsky D8 Compatible
- Output format: PWM / Sbus
- RSSI: RSSI on Ch9 of Sbus Output
- Range: more than 1km
- Antenna length: 15 cm
- Size: 40x26x16mm
- Weight:11 grams
Associated Products
- TX16S NEW COLOR SELECTION
- TX16S HALL WITH TBS MICROTX
- R84 R86 R86c R88 R161 Receiver replacement antenna (4pc)
All Receivers
- R81
- R84
- R86
- R86C
- R88
Package Includes
- 1 * R88 - D8 8ch PWM Receiver
Nuevo
RadioMaster TX16S MKII 2.4GHz 16CH Radio Transmitter ELRS
N.º de producto: HP0157-0020
En existencias
se puede enviar en 1 días
269,00 €
The best just got better! Introducing the TX16S Mark II, the ultimate open-source radio. We provide the standard TX16S Mark II radio, TX16S Mark II Max radio, TX16S Mark II Max Radio Controller (Joshua Bardwell Edition), and TX16S Mark II MAX Pro MCK Version.
Click to know more about TX16S MarkII: TX16S Mark II Radio Comparison Chart
Launch Video
Features
- Improved internal circuitry and optimized power supply.
- New charge circuitry with integrated reverse-polarity protection.
- Optimized charge IC now allows up to 2.2A internal USB-C charge current.
- Rear-mounted audio jack provided headphone output.
- V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
- Optional high/low rear grips are included for improved ergonomics.
- Improved S1/S2 knobs with clear centre-detents.
- Improved LS/RS Sliders with smoother feel and better centre-detents.
- Redesigned battery cover for improved battery access.
- Retooled body shell with improved fit and finish.
- Trainer socket changed to standard TRS 3.5mm socket.
- Rear DIY Socket added for personalized mods.
- Improved internal plastics for better longevity.
- Available ELRS and 4in1 versions.
Specification
- Size: 287x129x184mm
- Weight: 750g (without battery)
- Transmission frequency: 2.400GHz-2.480GHz
- Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
- Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
- SD card: 256MB by default, 8GB maximum
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
- Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)
- Channels: Up to 16 channels (depending on the receiver)
- Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
- Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
- Module Bay: JR compatible module bay
- Upgrade method: Supports USB-C online / SD card offline upgrade
Support EdgeTX and OpenTX
EdgeTX is installed by default (Touch screen enabled).
* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.
Available in 4in1 and ELRS versions
Here are the tips for you to choose 4in1 or ELRS, reviews by OscarLiang
"If you can’t decide between ELRS and 4in1, I’d probably go for the ELRS version. It’s going to be the major RC protocol in the near future as it’s so powerful and affordable, with a wide range of tiny and inexpensive ELRS receivers available.
One reason to get the 4in1 is if you only want to use other protocols such as Frsky D8/D16, but these are kind of obsolete and slowly phasing out. Or if you are buying an external ELRS module for the radio, then it also makes sense to get the 4in1 as you don’t want to have another ELRS module onboard doing nothing. An external ELRS module might have the advantage of higher maximum output power of up to 1W. But honestly the internal module’s 250mW is plenty for FPV pilots, giving you miles of range in ideal conditions. "
ExpressLRS BLE Joystick Mode
ExpressLRS BLE Joystick mode allows for Bluetooth connection to PCs, tablets and phones with Bluetooth function to play simulators and games.
*ExpressLRS version only
Optional V4.0 Hall Gimbals and AG01 Gimbals
V4.0 HALL GIMBALS
Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.
AG01 GIMBALS
AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.
Flat & Raised Grips Included
Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
Built-in dual speakers
External Module Bay
The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.
Easy Firmware Updates
Upgraded Design
- Retooled faceplate with improved fit and finish
- Improved S1/S2 knobs with center detents
-
4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
- Improved LS/RS Sliders with smoother feel and better centre-detents.
- New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
- Redesigned battery cover, easier to remove.
- Rear DIY Socket added for personalised mods.
Radio Overview
More Options
- TX16S Mark II with V4.0 Hall Gimbal or AG01 Hall Gimbal
- TX16S Mark II Max V4.0 Hall Gimbal or AG01 Hall Gimbal
- TX16S Mark II Max Joshua Bardwell Edition
- TX16S Mark II Max Pro MCK Edition
Package Includes
- 1 * TX16S Mark II Radio Controller
- 1 * 18650 Tray
- 1 * USB-C Cable
- 1 * Screen Protector
- 1 pair of flat grips
- 1 pair of raised grips (installed on radio by default)
- 1 * TX16S Key Chain
Los clientes que han comprado este producto también han comprado
 |
*
Examine esta categoría: Radiomaster
12pcs Labeled Silicon Switch Cover Set (Short
N.º de producto: HP0157.SWTCOV-S
En existencias
se puede enviar en 1 días
7,99 €
12pcs Labeled Silicon Switch Cover Set Long
N.º de producto: HP0157.SWTCOV-L
En existencias
se puede enviar en 1 días
7,99 €
Los clientes que han comprado este producto también han comprado
 |
*
Examine esta categoría: Radiomaster
RadioMaster Deluxe Neck Strap Adjustable for Transmitter
N.º de producto: HP0157 DLNCKST
En existencias
se puede enviar en 1 días
17,00 €
Los clientes que han comprado este producto también han comprado
 |
 |
*
Examine esta categoría: Radiomaster