AQUILA16 FPV KIT BY BETAFPV
N.º de producto: A16FPVK
En existencias
se puede enviar en 1 días
288,00 €
Technical characteristics
Discover the world of FPV with this complete Aquila16 FPV kit from BetaFPV.
This RTF kit consists of the Tinywhoop Aquila 1.6", the LiteRadio 2 SE radio and the VR03 FPV goggles.
The Aquila16 will allow you to enjoy stable hovering and full control.
Fly up to 8 minutes over a distance of up to 200 meters, enjoy and become a pro sooner with this kit!
AQUILA16 BNF
- Camera: C02
- Camera Angle Adjustment: 15°-30°
- Charger Used: BT2.0 Battery Charger and Voltage Tester V2
- Flight Controller: Aquila16 V1.0
- Flight Modes: N/S/M Mode
- Flight Time(4.35V-3.4V): 8 mins
- Frame Material: Black PA12
- Motors: 1102|18000KV
- Power Connector: BT2.0 Connector
- Propellers: Beta-45mm 3-Blades Props
- Receiver: Serial ELRS 2.4G 3.0 Version
- Receiver Binding: Power up 3 times
- Video Transmitter(VTX): Aquila 25-350mW VTX
- VTX Power and Range: 25mW (Range:80m), 350mW (Range:200m)
- Wheelbase: 86mm
- Weight(Without Battery): 47.1g
- Takeoff Weight(With 1100mAh Battery): 72.5g
LITERADIO 2 SE
- Frequency band: 2.4G (2403MHz-2447MHz)
- Mode 2 (Throttle left)
- System: ELRS 2.4G
- Power: ≤80mw*
- Charging via USB
- Simulator Compatible
- Output: support Student Radio Mode
- LED Light: Green: On / Red -Attention / Blue-Normal
- Battery: 1000mAh 1S
- Weight: 227.4g (with battery)
VR03
- Size: 130*145*90mm
- Weight: ~300g
- Camera format: NTSC/PAL
- Channels: 48
- Screen size: 4.3 inches
- Resolution: 800*480
- Battery: 3.7V, 2000mah
- Autonomy in normal mode: ~2h
- Battery life in recording mode: ~1h 10 min
- Maximum charging current: 1A
- Antenna port: RP-SMA
- Charging Port: Type-C
- Card slot: Micro SD card
- Screen resolution: 480P
- File format: AVI
INCLUDED
- 1x Aquila16 Brushless Quadcopter
- 1x LiteRadio 2 SE Radio Transmitter
- 1x VR03 FPV Goggles
- 4x Beta-45mm 3-Blades Props (Spare Set)
- 2x Aquila16 Exclusive Battery|1100mAh
- 2x Charging Adapter Cable
- 1x BT2.0 Battery Charger and Voltage Tester V2
- 1x 4Pin Adapter Cable
- 1x USB Charging Cable (Type-C)
- 1x Cross Screwdriver
- 1x Exclusive Screw Set (Spare)
- 1x Prop Removal Tool
- 1x Portable Storage Bag
- 1x User Manual
- 1x USB Type-C Adapter Board