The 8A-UBEC is a switch-mode DC-DC regulator works with a 2-3S Lipo battery, it outputs a consistent safe voltage for your receiver, gyro and servos.
It is very suitable for large scale RC models with many servos such as nitro powered RC helicopters and airplanes.
Applications
-
Large scale RC models with many servos such as nitro powered RC helicopters and airplanes
Specification
-
Output Voltage: 5V or 6V (Changeable with a switch )
-
Continuous output current: 8 Amps
-
Burst output current: 15 Amps
-
Input: 6V-12.6V (2-3S Lipo battery)
-
Quiescent current: 60mA
-
Size: 42mm*39mm*9mm (length*width*height)
-
Weight: 36g
Features
-
Uses advanced switch-mode DC-DC regulator IC.
-
The output current is very large to supply all electric equipments.
-
Output short-circuit protection function.
-
A metal shield and a filter significantly reduce the electromagnetic interference.
-
Automatically detects the amount of the Lipo battery pack (2S or 3S).
-
Shows the battery capacity with 4 LEDs.
-
Shows the working status with a LED, it lights when the UBEC works normally.
-
There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.
-
With a step-down voltage regulator of 0.7V down as accessory
(It changes the output from 6.0V to 5.3V for some special equipments that cannot work with 6V inputs).