Hobbywing ubec - 8a ( 2 - 3 S ) MAX 15A switch

The 8A-UBEC is a switch-mode DC-DC regulator works with a 2-3S Lipo battery, it outputs a consistent safe voltage for your receiver, gyro and servos. 
It is very suitable for large scale RC models with many servos such as nitro powered RC helicopters and airplanes.

Applications

•  Large scale RC models with many servos such as nitro powered RC helicopters and airplanes

Specification

• Output Voltage: 5V or 6V (Changeable with a switch ) 
• Continuous output current: 8 Amps
• Burst output current: 15 Amps 
• Input: 6V-12.6V (2-3S Lipo battery) 
• Quiescent current: 60mA
• Size: 42mm*39mm*9mm (length*width*height)
• Weight: 36g

Features

• Uses advanced switch-mode DC-DC regulator IC. 
• The output current is very large to supply all electric equipments.
• Output short-circuit protection function.
• A metal shield and a filter significantly reduce the electromagnetic interference.
• Automatically detects the amount of the Lipo battery pack (2S or 3S).
• Shows the battery capacity with 4 LEDs.  
• Shows the working status with a LED, it lights when the UBEC works normally.
• There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.
• With a step-down voltage regulator of 0.7V down as accessory 

       (It changes the output from 6.0V to 5.3V for some special equipments that cannot work with 6V inputs).