Matek PDB-XT60 With BEC 5V & 12V

A power distribution board from Matek Systems with integrated 5V and 12V voltage regulators and XT60 connector pad for tidy installations. This PDB is designed for 3s-4s Li-Po operation and has 6 pairs of ESC solder pads. The 5V onboard regulator supports currents up to 2A and the 12V supports up to 0.5A (bursts up to 0.8A). The ESC outputs support a maximum current of 25A each or 15A each if all six pads are used. Short bursts up to 30A and 20A respectively can be tolerated.

Please note the 12V BEC is primarily designed for operation with 4s batteries, if 3s is used, the BEC will output the LiPo voltage minus 1V.

Physical specification: -

• Dimensions: 36×50x4mm (without XT60)
• 30.5×30.5 mounting pattern (⌀3)
• Weighs just 11g with XT60 connector

Matek XT60 power distribution board features: -

• 9-18V DC input (3-4s Li-Po)
• LED power indicators
• 6 ESC outputs and a pair of +/- pads
•