1 - 10 de 30 resultados

DUO5800V3 A/V DIVERSITY RECEIVER

N.º de producto: DUO5800V3

No disponible en estos momentos

Notificar sobre disponibilidad
109,00

TrackerLink:
Another ImmersionRC first, the TrackerLink port makes a direct connection between the Duo5800 and the ImmersionRC Antenna Tracker (Rev. 2). This link provides the tracker with the RSSI signal strength data from each antenna, which the tracker then displays on its LCD display. This data is then used to optimize the tracking antenna’s positioning, continuously during a flight.

Quality:

The higher video bandwidth, when compared with 2.4GHz systems, provides a high quality video image.

Connectivity:
The standard 3.5mm 4-pole jacks combine video and stereo audio in one simple connection. These are also compatible with all FatShark/ImmersionRC equipment, and greatly reduce ground-station ‘clutter’. (Combine with the ImmersionRC Power Box to increase the number of A/V outputs to 5!) Cables terminated in the 4-pole jacks are available in various lengths to interconnect equipment. Two buffered A/V outputs are supplied, in addition to the TrackerLink port, allow an LCD Display/Goggles to be used at the same time as a video recorder.

Safety:

An audible low-battery alarm provides plenty of warning before a ground-station battery is drained. Programmable for auto-detection of LiPo packs, or a user-defined voltage level.

•A/V receiver with diversity antenna inputs
•TrackerLink for direct link to the ImmersionRC Antenna Tracker (Rev. 2)
•Sensitive NexWaveRF receivers (-90dBm)
•SMA antenna connectors, compatible with standard 5.8GHz antennas (omni or directional)
•Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
•Supplied with two 5.8GHz ‘Rubber-duck’ antennas
•Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
•Not affected by 2.4GHz R/C radios!
•Audible Low-battery alarm
•Weight: 200 grams
•Size: 80 x 100 x 23mm
•Input voltage range: 6 – 12V at 500 mA (3s Lipo Ideal)

 

Los clientes que han comprado este producto también han comprado

*



Examine esta categoría: ImmersionRC

600MW 5.8GHZ A/V TRANSMITTER WIRE SET

N.º de producto: 600MW WIRE

En existencias
se puede enviar en 1 días

4,50



600mW 5.8GHz A/V Transmitter wire set

  • 5p molex to tined end 
  • 2p to 2p molex - DC extention cable

 

 

Los clientes que han comprado este producto también han comprado

OSD WIRE SET
5,50 *
DJI iOSD Mini
59,00 *
*



Examine esta categoría: ImmersionRC

Immersion RC EzOSD On Screen Display (Deans)

N.º de producto: EZOSDD

En existencias
se puede enviar en 1 días

175,00



Product description

Supplied with 

1 x 20cm 5pin molex/tinned power cable
1 x 24cm 5pin/5pin Molex cable
1 x 24cm 4pin/4pin Molex cable
1 x 24cm 2pin/2pin Molex cable
1 x 25cm GPS cable
1 x 45mm GPS cable

An on-screen display is a very important part of an FPV'ers equipment.

Similar to the HUD in a fighter-plane, the OSD overlays various pieces of critical information onto the video image, which will be viewed by the FPV pilot.

Important questions, such as 'Which way is home', 'What is the state of my battery', are answered at a glance.

Equally important information, such as 'how far away am I', 'how high am I', can help comply with local FPV rules & regulations.

ImmersionRC's approach to on-screen displays is a little different than other manufacturers. Instead of a crowded display, with a bunch of rarely-needed information, just the essentials are shown. FPV is about enjoying the scenery, not admiring the handywork of the OSD manufacturer :-)

The EzOSD is now supported by an iPhone application 'iTelemetry', which allows a plane's position to be tracked in real-time, at the flying field. The simple cable required to interface your video Rx to the iPhone may be purchased here.
This is the first, and currently the only FPV product to be supported on the iPhone!

 

 

Examine esta categoría: ImmersionRC

EZUHF RECEIVER, 8 CHANNEL DIVERSITY

N.º de producto: EZUHF

No disponible en estos momentos

Notificar sobre disponibilidad


89,00 €
59,00

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
433MHz/70cm Ham band operation
-112dBm Sensitivity
Bi-directional ready (contains onboard transmitter)
Diversity Antenna configuration
ceramic filtered inputs, eliminates nearby high-power video Tx interference
Mikrokopter mode, emits PPM on a chosen channel
Vehicle mode, couples two chosen channels (ideal for coupling steering servos on monster trucks)
USB Connection for easy firmware upgrades, and advanced configuration
EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters:
-RSSI Ant 1, Ant 2
-Frequency Error
-SNR for each freq. bin
-Link Quality
Standard SMA antenna connectors, compatibility with standard 433/70cm band antennas
8 standard servo connectors
Failsafe, preset by button on the EzUHF transmitter

 

 

 

Los clientes que han comprado este producto también han comprado

V912-02 Flybar
5,00 *
V912-11 Swashplate
2,50 *
*



Examine esta categoría: ImmersionRC

EZUHF TRANSMITTER

N.º de producto: EZUHFTX1

En existencias
se puede enviar en 1 días


188,00 €
99,00



Item Description

 
 

ImmersionRC EzUHF Transmitter 10602004

The EzUHF R/C control system is a reliable R/C control uplink for FPV and UAV pilots who desire a robust control system for safe control at longer distances.

It was designed with the FPV/ UAV pilot in mind, the only such system with a dedicated head-tracker port, ensuring compatibility with a wide range of radios.

Features/ Specifications

•   Reliable FHSS Link (Frequency Hopping, Spread Spectrum)

•   433MHz operation with standard firmware - UK customers can download the special UK firmware here: http://www.immersionrc.com/EzUHF.htm which changes the EzUHF to work on 459MHz at 100mW (459MHz is a licence free band reserved for model control)

•   Spectrally clean GFSK modulation

•   Direct head-tracker input, adding head-tracker compatibility to most radios

•   Power switch, boost power when at long range

•   Standard SMA antenna connector, compatibility with 433MHz/70cm Ham-band antennas

•   Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels

•   Standard USB port (Mini-A) for firmware upgrades, and system configuration

•   Single pushbutton learning of failsafe positions

•   Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx

•   Mates with 8 channel, and 4 channel EzUHF receivers

•   Works with Futaba FF7 and above radios

•   Power sourced directly from the R/C Tx (Futaba), or optional DC power jack

•   Built in receiver, for future expansion

•   Custom extruded brushed aluminum enclosure

•   Dimensions 85 x 74 x 23mm 118g

•   Power Requirements: 9-12v DC 85mA @ 12v

Nb. This product is now supplied with 433 MHz antennas.

 

Examine esta categoría: ImmersionRC

XUGONG-10" FRAME KIT

N.º de producto: XUGONG10KIT

En existencias
se puede enviar en 1 días


199,00 €
139,99



A unique foldable quadcopter, which, when folded, will fit comfortably into a shoe-box. 

Ideal for the FPVer/Photographer/Videographer who likes to travel. Designed for the hiker, the skiier, the snowboarder, the world traveller. 

Folding arms use a unique locking mechanism, which requires no tools. 10 seconds from the backpack to power-up.

 

Specs:

- This version designed for 10" props

- >18 minute flight time with standard DJI motors & props (10" version, 1038 props)

- Vibration-free camera platform, entire frame+battery+camera isolated from the vibrating parts

- ~1.2kg, with 3300mAh 4s pack, GoPro Hero 3, and next-gen CMOS flight camera installed

- Aluminium arms bend in a serious crash, and can simply be bent back

- Designed for DJI Naza, and OpenPilot flight controllers

- Servo-driven tilt mount with 90 degrees of rotation (requires Hitec HS65HB servo, not included)

- GoPro 3 mount, with separate (optional) flight-camera mount. 

  • Model: XUGONG10KIT
  • Shipping Weight: 1
  • 0 Units in Stock
  • Manufactured by: ImmersionRC

 

 

Examine esta categoría: ImmersionRC

XUGONG-8" FRAME KIT

N.º de producto: XUGONG8KIT

En existencias
se puede enviar en 1 días


189,00 €
129,99



A unique foldable quadcopter, which, when folded, will fit comfortably into a shoe-box. 

Ideal for the FPVer/Photographer/Videographer who likes to travel. Designed for the hiker, the skiier, the snowboarder, the world traveller. 

Folding arms use a unique locking mechanism, which requires no tools. 10 seconds from the backpack to power-up.

 

Specs:

- This version designed for 8" props

- >18 minute flight time with standard DJI motors & props (10" version, 1038 props)

- Vibration-free camera platform, entire frame+battery+camera isolated from the vibrating parts

- ~1.2kg, with 3300mAh 4s pack, GoPro Hero 3, and next-gen CMOS flight camera installed

- Aluminium arms bend in a serious crash, and can simply be bent back

- Designed for DJI Naza, and OpenPilot flight controllers

- Servo-driven tilt mount with 90 degrees of rotation (requires Hitec HS65HB servo, not included)

- GoPro 3 mount, with separate (optional) flight-camera mount. 

  • Model: XUGONG8KIT
  • Shipping Weight: 1
  • 47 Units in Stock
  • Manufactured by: ImmersionRC

 

 

Los clientes que han comprado este producto también han comprado

*



Examine esta categoría: ImmersionRC

OSD WIRE SET

N.º de producto: OSDwire

No disponible en estos momentos

Notificar sobre disponibilidad
5,50

Complete replacement set of wires for ImmersionRC EZ-OSD.

Package includes:
1 x 5p molex to 5p molex
1 x 5p molex to tined end
1 x 4p molex to 4p molex
1 x 2p molex to 2p molex
1 x Short GPS cable (55mm)
1 x Long extension cable for GPS (260mm)

 

 

 

Los clientes que han comprado este producto también han comprado

*



Examine esta categoría: ImmersionRC

600mW 5.8GHz A/V V3 Transmitter

N.º de producto: 600mW 5.8Ghz

No disponible en estos momentos

Notificar sobre disponibilidad


79,00 €
39,50

Immersion TX 600 mW V3 5.8 GHz 100% compatible fatshark

-600mW (28dBm, +/- 1dB) of clean output power
-SMA female antenna connector.
-Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
-Onboard quiet switching regulator, powers 5V cameras
-Input voltage range: 6 – 25V (2S-6S)
-Not affected by 2.4GHz R/C radios!

 

The 600mW version of the 5.8GHz transmitter greatly increases the range of a 5.8GHz link, adding a margin of security over the 25/100mW version. Team up with a Duo5800 receiver on the ground, and enjoy noise-free video further than you can see your model.

 

  • 600mW (27dBm, +/- 1dBm) of clean output power
  • SMA Antenna connector, with supplied 5.8GHz Rubber-duck antenna
  • Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
  • Not affected by 2.4GHz R/C radios!

Los clientes que han comprado este producto también han comprado

DJI iOSD Mini
59,00 *
*



Examine también estas categorías: Sistema y Electronicas para Multicopteros, ImmersionRC

5.8GHz A/V "Uno V.2" Receptor (Immersion RC´s)

N.º de producto: Uno V.2

En existencias
se puede enviar en 1 días


59,00 €
39,99



Ground Station Component Receiver:

The Uno5800 is the first in a line of ‘smart’ receivers designed for single-cable, plug and play, integration with the ImmersionRC Ground Station system.

The UNO5800 passes poweraudiovideo, and a bidirectional data link, through a single Mini-Din connector, to the Ground Station, and also provides traditional 3.5mm jacks, and DC power jacks, for compatibility with older systems. (mini-din connector will be available separately, Uno includes 1 30cm a/v cable with female RCA plugs and 1 2.1mm barrel connector power lead with bare wires)

The data link allows the Ground Station to know, at all times, the received signal strength (RSSI), allowing it to warn the pilot of low-signal conditions, helping ‘hone’ a GPS-tracked antenna mount, to ensure that the antenna is always optimally positioned pointing at the plane. This same data link allows the Ground Station to control various aspects of the receiver. An antenna mounted directly on the antenna’s RF output eliminates cable loses but, can cause difficulty gaining access to the controls directly on the receiver, but with the UNO’s data link channel selection can be controlled on the ground station.

 With > -90dB sensitivity per receiver the Uno 5800 is sensitive, very sensitive. Paired with an appropriate antenna, it will give you many miles/km of range. Add an antenna tracker, and a higher gain antenna, and this range increases significantly.

Like every ImmersionRC product, we have engineered the UNO5800 from an FPV-er’s perspective. It will warn you when the receiver battery runs low, with an automatic, or user-settable low voltage threshold.
Nexwave:
FatShark and ImmersionRC Ltd. are proud to announce the launch of the 'NexWaveRF' series of A/V RF modules.
The first in this series are for the 5.8GHz band, using the 'Airwave' frequencies used previously by FatShark, ImmersionRC, and other companies such as Iftron.
 
These modules are full custom designs, targeting the FPV market, with the following key features:

• Significant range increase over previous modules, approaching a factor of 2 in most practical situations
• Much less abrupt loss of signal when approaching the limits of range
• Extensive filtering of UHF, and 2.4GHz emissions in close proximity to the receiver (important for goggle use)
• Greatly reduced tendency to 'tear' at the top of the image
• Compatible with existing FatShark/ImmersionRC 5.8GHz equipment

The increased performance of these modules, combined with the 5.8GHz SpiroNET omnis, and the upcoming 5.8GHz SpiroNET patch antennas, will make FPV using CE-legal 25mW systems much more viable.

5.8GHz 'Uno' receiver

- Frequencies (Airwave) : 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz (all within the legal ISM band)

- Dual buffered A/V outputs

- Single Cable Groundstation Connection (Power, Audio, Video, Control) 

- 6-13v DC Supply

- High Bandwidth Stereo Audio

 

Los clientes que han comprado este producto también han comprado

*



Examine también estas categorías: Sistema y Electronicas para Multicopteros, ImmersionRC
1 - 10 de 30 resultados